Test Tagging Sydney

What Is Test Tagging?

It is a procedure that Caslec assesses the safety of electrical equipment at your premises. Without it, you, your colleagues & customers could be at risk. It involves inspecting electrical equipment, applying labelling & creating records to indicate that a professional appliance test has been performed.

When is Testing Required?

There are various times for testing and inspections for the different properties such as factories, workshops, hotels, motels, halls, boarding houses & so on and this needs to be organised for testing when they are actually required, which is quite important. The testing frequency for portable devices varies according to the nature of the workplace and the type of equipment.

The Tables available for these procedures are AS/NZS 3760 & AS/NZS 3012 & provides the details of compliance & required times.

Electrical inspection and testing

Certain types of electrical equipment must be regularly inspected and tested by a competent person to identify damage, wear and detect electrical faults.

If you are a business or employer (or other PCBU) you must make sure that electrical equipment is regularly inspected and tested by a competent person if the electrical equipment:

is supplied with electricity through an electrical socket outlet (‘plug in’ equipment), and
used in an environment in which its normal use exposes the equipment to operating conditions that are likely to result in damage to the equipment or a reduction in its expected life span, eg conditions such as exposure to moisture, heat, vibration, mechanical damage, corrosive chemicals or dust.

What Our Test Tagging Service Offers

At Caslec, we work closely with you to carry out electrical safety testing in your business. We test all relevant equipment and have specialist computers, printers, labelling and software required for the testing process.

As a valued customer, you’ll receive a dedicated report, detailing any testing we carry out on your premises which you can keep for your records. By law, you are required to keep any records of electrical safety testing either until you get a new test report for an appliance, or the appliance is taken out of service.

Various requirements are needed to be done during these important general installations in ALL buildings.

Contact Caslec to assist you to ensure your equipment is tested and satisfactory.

Why choose Caslec?

Learn More About Caslec

Established 1971

Qualified & Trained Technicians

Emergency Response

Specialising & Experienced In Major Projects

Frequently Asked Questions

1. What is test & tagging and why is it important for my business?

Test & tagging involves inspecting electrical appliances, applying labels and creating records to confirm that equipment has been professionally tested for safety.

It’s important because without it you, your staff or your customers could be exposed to electrical hazards.

2. Which equipment needs to be tested and tagged and when?

Any “plug-in” equipment used in a work environment, especially ones exposed to moisture, heat, vibration, mechanical damage or dust, needs to be regularly inspected and tested.

The frequency of testing varies according to the type of workplace and equipment, and is guided by standards such as AS/NZS 3760 and AS/NZS 3012.

3. What does Caslec’s test & tag service include?

Caslec’s service includes a full inspection of relevant electrical equipment at your premises, use of specialist tools (label printers, testing software), and provision of a detailed report for your records.

We also handle the labelling and documentation to ensure you meet regulatory requirements.

4. Is there a legal requirement for test & tagging in Australia?

Yes, Businesses and PCBU (persons conducting a business or undertaking) must ensure electrical equipment is regularly inspected and tested by a competent person if it is connected via a plug and used in environments likely to cause damage or reduce lifespan.

The records of such testing must also be retained until the appliance is replaced or next test report is issued.

5. How can I arrange a test & tagging service with Caslec?

You can visit here or by phone at +61 2 9604 4488 to schedule a site visit.

We will carry out the testing, provide labelling and deliver a full report so you can stay compliant and safe.

Ready to start your next move?

Get In Touch

Let’s Talk About Your Facility

Planning an upgrade or new system? Let’s talk early, we’ll help you avoid costly downtime.

Get in Touch

Services

General Electrical

Industrial

Lighting

Data & Comms

Home

Services

Projects

About Us

Contact Us

Services

Test Tagging Sydney

What Is Test Tagging?

When is Testing Required?

Electrical inspection and testing

What Our Test Tagging Service Offers

Why choose Caslec?

Established 1971

Qualified & Trained Technicians

Emergency Response

Specialising & Experienced In Major Projects

Frequently Asked Questions

1. What is test & tagging and why is it important for my business?

2. Which equipment needs to be tested and tagged and when?

3. What does Caslec’s test & tag service include?

4. Is there a legal requirement for test & tagging in Australia?

5. How can I arrange a test & tagging service with Caslec?

Ready to start your next move?

Let’s Talk About Your Facility

Enter New

Confirmation